Rikon Power Tools 25-210 Owner's Manual download pdf (Page 3)

SAFETY SYMBOLS

IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following

instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,

re, and/or serious personal injury.

There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied

and/or used for any other application other than that for which it was designed. If you have any questions about its

application, do not use the tool until you have contacted us and we have advised you.

SAFETY INSTRUCTIONS

GENERAL SAFETY

KNOW YOUR POWER TOOL. Read the owner’s manual

carefully. Learn the tool’s applications, work capabilities,

and its specic potential hazards.

BEFORE USING YOUR MACHINE

To avoid serious injury and damage to the tool, read and

follow all of the Safety and Operating Instructions before

operating the machine.

1. Some dust created by using power tools contains chem-

icals known to the State of California to cause cancer, birth

defects, or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and other

• masonry products.

• Arsenic and chromium from

chemically treated lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area and work

with approved safety equipment, such as those dust masks

that are specially designed to lter out microscopic

particles.

2. READ the entire Owner’s Manual. LEARN how to use

the tool for its intended applications.

3. GROUND ALL TOOLS. If the tool is supplied with a 3

prong plug, it must be plugged into a 3-contact electrical

receptacle. The 3rd prong is used to ground the tool and

provide protection against accidental electric shock. DO

NOT remove the 3rd prong. See Grounding Instructions

on the following pages.

4. AVOID A DANGEROUS WORKING ENVIRONMENT.

DO NOT use electrical tools in a damp environment or

expose them to rain.

5. DO NOT use electrical tools in the presence of

ammable liquids or gases.

6. ALWAYS keep the work area clean, well lit, and

organized. DO NOT work in an environment with oor

surfaces that are slippery from debris, grease, and wax.

7. KEEP VISITORS AND CHILDREN AWAY. DO NOT

permit people to be in the immediate work area,

especially when the electrical tool is operating.

8. DO NOT FORCE THE TOOL to perform an operation

for which it was not designed. It will do a safer and

higher quality job by only performing operations for

which the tool was intended.

9. WEAR PROPER CLOTHING. DO NOT wear loose

clothing, gloves, neckties, or jewelry. These items can

get caught in the machine during operations and pull the

operator into the moving parts. The user must wear a

protective cover on their hair, if the hair is long, to

prevent it from contacting any moving parts.

10. CHILDPROOF THE WORKSHOP AREA by

removing switch keys, unplugging tools from the

electrical receptacles, and using padlocks.

11. ALWAYS UNPLUG THE TOOL FROM THE

ELECTRICAL RECEPTACLE when making adjust-

ments, changing parts or performing any maintenance.

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used

in conjunction with other symbols or pictographs.

Indicates an imminently hazardous situation, which, if not avoided, could result in death or

serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious

injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in minor or

moderate injury.

NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

1 2 3 4 5 6 7 8 ... 39 40

Comments to this Manuals

No comments

Rikon Power Tools 25-210 Owner's Manual Page 3

Comments to this Manuals

Related products and manuals for Power planers Rikon Power Tools 25-210